My matrix printer prints very slowly from a Windows environment

[bsf-info-box icon=”Defaults-info-circle” icon_size=”32″ icon_color=”#1e73be”][/bsf-info-box] Information It is recommended to use the PSi original printer driver and use of the application only internal printer fonts. TrueType fonts are fonts graphics printed with graphics speeds. However, if the need TrueType fonts to use, the PP40x) and all models offer the possibility of accelerating the Grafidruckes. In macro…

Détails

How can the performance be increased in barcode printing?

[bsf-info-box icon=”Defaults-info-circle” icon_size=”32″ icon_color=”#1e73be”][/bsf-info-box] Information Printed with the Font Data also bar with PSi sequences, optimizing performance is possible. The parameter P7 should preferably be set to the value “3” in the barcode sequence on the system side. Then the PSi barcode is printed in “NLQ unidirectional”. This is sufficient for most applications. Tests with…

Détails

Buffer Overflow by operating serial interfaces

Verlust von Einstellungen im Menü. Der Drucker hat plötzlich wieder Fabrikeinstellungen. [bsf-info-box icon=”Defaults-close remove times” icon_size=”32″ icon_color=”#dd3333″][/bsf-info-box] Cause of The pull-up resistor for the Cond CTS (PIN 5 on 25-pol. Connector) is not due to + 12V to + 5V but. Thus, sending X-OFF / X-ON is non-connected at CTS -Ltg. suspended because the level…

Détails