Verlust von Einstellungen im Menü. Der Drucker hat plötzlich wieder Fabrikeinstellungen.

[bsf-info-box icon="Defaults-close remove times" icon_size="32" icon_color="#dd3333"][/bsf-info-box]

Cause of

The pull-up resistor for the Cond CTS (PIN 5 on 25-pol. Connector) is not due to + 12V to + 5V but. Thus, sending X-OFF / X-ON is non-connected at
CTS -Ltg. suspended because the level does not min. 3V reached.

[bsf-info-box icon="Defaults-check" icon_size="32" icon_color="#81d742"][/bsf-info-box]


Set a Bridge from PIN 20 to PIN 5 in the cable or connector PM.